Most common plate rolling jobs in Montreal land between $40 and $120 per piece for standard labour passes, with full small-batch parts such as cylinders running roughly $80 to $300, though larger diameters, thicker stock or tight tolerances push well past that. Material, thickness, diameter, and quantity drive most of the swing. Send drawings and specs early so we can turn that range into a firm number.
TL;DR:
- Quotes may bundle rolling labor, setup, and a basic material allowance, but delivery, taxes, handling, finishing, and material price changes can add charges.
- Simple channels cost $30–$80 per piece, cylinders $80–$300, and cones $150–$400; these Ontario examples are starting points, not Montreal quotes.
- Repeat batches spread setup costs across pieces, while prototypes and single orders often face markups or minimum charges; request pricing for your actual quantity.
- Structural parts require early confirmation of load bearing use, grade, and code responsibilities, since certification, weld procedures, and inspection can add scope and cost.
- Dimensioned drawings listing grade, thickness, diameter, and tolerance produce firmer quotes; straightforward jobs may take days to weeks after approval, while complex work takes longer.
Table of Contents
- What’s included in a plate rolling quote, and what costs extra
- How fabricators price a rolling job: per piece, by the hour, or by minimum
- Do Quebec building codes affect plate rolling quotes?
- Sample pricing for common Montreal plate rolling jobs
- How Montreal labour rates factor into your rolling quote
- Lead times and minimum charges to plan around
- What contractors get wrong when requesting a rolling quote
- Get a firm plate rolling quote from a Montreal shop
- FAQ
- Sources
What’s included in a plate rolling quote, and what costs extra
A plate rolling quote in Montreal usually bundles the rolling labour, machine setup, and a basic material allowance into one line. What falls outside that line is where budgets get surprised.
Transportation within Greater Montreal is often quoted separately from the rolling itself, especially for oversized or heavy rolled sections that need a flatbed or crane-assisted delivery. A job rolling a plate for pickup at a Lachine shop costs less to move than one needing delivery and site handling in Laval or the South Shore.
Provincial sales taxes apply on top of the fabrication total, as they do on any goods and services purchased in Quebec, and should appear as a separate line rather than be buried in the unit price. Handling fees, when they exist, usually cover crane time, rigging, or protective wrapping for finished plates, not the rolling pass itself.
Material cost is sometimes quoted at the time of order rather than locked at quote time, because steel and stainless pricing moves with mill rates. A quote that promises a fixed material price weeks out is either padding the number or assuming the order closes fast.
Finishing, drilling, welding seams closed, or adding flanges to a rolled cylinder are typically priced as add-ons, not folded into the base rolling rate. Ask for each of these as its own line so you can compare quotes apples to apples rather than guessing what’s bundled where.
How fabricators price a rolling job: per piece, by the hour, or by minimum
Most Montreal shops price plate rolling one of two ways: a flat per-piece rate for straightforward geometry, or a shop-rate hourly charge when a part needs multiple passes, repositioning, or custom tooling. Canadian metal fabrication shop rates commonly run $75 to $150 or more per hour depending on equipment and the complexity of the part, and rolling jobs that need several passes to hit a tight radius tend to land toward the higher end of that band.
Per-piece pricing works well for repeat orders of the same channel or cylinder size, where a shop already knows its setup time. One-off or prototype parts almost always carry a markup over that baseline, since setup and calibration eat into the hour regardless of how simple the final shape looks.
Shop minimums are common on small orders. A single rolled plate still consumes setup time, roll calibration, and handling that a shop would otherwise spread across a larger run, so expect a minimum charge even on a modest job. A practical estimate-components checklist can help contractors line up labour, material, and setup costs the same way a fabricator does, which makes comparing two quotes far easier.
Markup on material typically sits on top of the rolling labour rather than inside it, covering handling and the risk of holding stock between quote and delivery.
Do Quebec building codes affect plate rolling quotes?
When a rolled plate is part of a structural or building assembly, rather than a standalone industrial part, the applicable code becomes part of the quote, not an afterthought. Quebec construction falls under the Code de construction du Québec, Chapitre I: Bâtiment, which amends the National Building Code of Canada for provincial use, and a fabricator needs to know early whether a rolled plate will be load-bearing, part of a stair or railing assembly, or purely decorative.
That distinction changes what the quote has to cover. A structural rolled plate may need material certification, specific weld procedures, or inspection sign-off tied to the project’s permit, none of which apply to a decorative cylinder or planter shell. Code compliance also affects who holds design responsibility on paper: a general contractor, an engineer of record, or the fabricator, and ambiguity there is a common source of scope creep once a job is underway.
Material specification references used in Quebec code documentation point to standard ASTM and CSA grades, so a quote tied to building work should name the steel or stainless grade explicitly rather than leave it open. Getting this sorted before rolling starts avoids rework, which costs far more than the extra five minutes it takes to confirm on the drawing.
Sample pricing for common Montreal plate rolling jobs
Real numbers help more than averages when you’re budgeting a specific job. Illustrative ranges from online rolling-quote services show simple channels running $30 to $80, cylinders $80 to $300, and cones $150 to $400 per piece, with labour passes for common sizes typically falling between $40 and $120. These figures come from an Ontario-based example and move with local shop rates, material grade, and order size, so treat them as a starting point rather than a Montreal-specific quote.
A small decorative cylinder rolled from mild steel for a railing infill panel sits near the lower end of that band. A thicker stainless cone section destined for an industrial application, with multiple passes and tighter tolerance, pushes toward the top.
Quantity matters as much as geometry. A one-off part absorbs the full setup cost on its own, while a run of ten identical channels spreads that same setup across every piece, dropping the effective per-unit price noticeably. Contractors budgeting for a multi-unit project, such as matching railing sections across several floors, should ask for pricing at the expected batch size rather than assume a single-piece quote scales down linearly.
How Montreal labour rates factor into your rolling quote
Labour burden on a Quebec fabrication job isn’t set shop by shop. Hourly wage, benefit, and premium rates for construction trades come from the CCQ monthly report, which confirmed updates effective April 26, 2026 affecting wage rates, contributions, and allowances across Quebec construction trades. Those updates flow directly into the hourly shop rate a fabricator charges, since wages, benefits, and employer contributions make up a significant share of that number.
A detailed breakdown of current trade-specific rates and employer contributions appears in the CCQ industrial wage table for 2026 to 2027, which contractors and fabricators use to calculate labour burden on Quebec projects. When a shop quotes a plate rolling job tied to a unionized or CCQ-governed site, that wage table, not a generic hourly estimate, sets the floor for labour cost.
This context matters most when comparing a Montreal quote against one from outside Quebec: CCQ rate structures and contribution requirements don’t apply the same way elsewhere, so a lower out-of-province number rarely reflects an apples-to-apples comparison once local labour rules are factored in.
Lead times and minimum charges to plan around
Plate rolling in Montreal rarely ships same week unless a shop already has the right roll tooling set up for your diameter and thickness. Expect a few days to a couple of weeks for straightforward jobs once drawings are approved, with longer lead times for thick plate, large diameters, or parts that need multiple passes and intermediate stress relief.
Setup fees or shop minimums apply regardless of how small the final part is, since calibrating the rolls and running a test pass takes real time whether you’re ordering one piece or fifty. Batching similar parts into a single order, even across a multi-phase project, reduces the number of times that setup cost gets charged.
Pro Tip: Confirm lead time in writing before material ordering starts; a verbal estimate at quote stage can shift once a shop’s schedule fills up.
What contractors get wrong when requesting a rolling quote
Two mistakes show up constantly: sending a sketch instead of a dimensioned drawing, and leaving out the end use of the part. Both force a shop to quote a range instead of a number, which slows everyone down.
Confirm the material grade and tolerance first, before comparing any dollar figures between shops. A quote without those two details isn’t comparable to one that has them, no matter how close the totals look.
Book shop time as soon as drawings are final. Shops with the right roll tooling for your job book up, and a late confirmation often means waiting for the next open slot.
— Ash
Get a firm plate rolling quote from a Montreal shop
Budgeting ranges only get you so far. The number that matters is the one tied to your actual drawings, material grade, and tolerance, and that’s what we build when a Montreal contractor sends us specs rather than a rough sketch.
We roll, bend, and fabricate plate in-house and install locally, which keeps quality control and scheduling in one set of hands rather than split across subcontractors.
- We quote profile rolling and sheet bending and rolling jobs directly from your drawings, with material grade and tolerance confirmed before we commit to a number.
- We handle everything from a single decorative cylinder to multi-unit structural runs, with setup and material allowances itemized rather than bundled into a vague total.
- We fabricate and install locally, keeping transportation and handling costs predictable.
Send your drawings through our contact page and we’ll turn them into a firm, itemized quote for your Montreal project.
FAQ
What’s a typical price range for plate rolling in Montreal?
Common rolling labour runs $40 to $120 per piece for standard sizes, with full parts like cylinders landing between roughly $80 and $300. Thicker material, larger diameters, or added finishing push costs above that range, so a firm number always depends on your specific drawings.
Does Manara Corp quote plate rolling for structural building work?
Yes, we quote rolling jobs tied to building assemblies and confirm material grade and code requirements before pricing. Structural work governed by the Code de construction du Québec needs that detail settled early rather than assumed at quote stage.
Why do two plate rolling quotes for the same part differ so much?
The gap usually comes from what’s bundled in: one quote may include setup, material allowance, and transportation, while another lists those as separate charges. Shop hourly rates also vary, with Canadian fabrication shops commonly charging $75 to $150 or more per hour depending on equipment and complexity.
How does CCQ wage data affect my plate rolling quote?
Labour burden on Quebec fabrication jobs follows CCQ wage and contribution rates, which were updated effective April 26, 2026 according to the CCQ monthly report. Those rates set the floor for the hourly shop rate on any Quebec job tied to CCQ-governed labour.
What information speeds up getting an accurate rolling quote?
A dimensioned drawing with material grade, thickness, diameter, and tolerance gets you the fastest and most accurate quote. Mentioning whether the part is structural, decorative, or industrial also helps a fabricator price any code-related or finishing requirements correctly from the start.
Sources
- Code de construction du Québec, Chapitre I : Bâtiment (CNRC)
- CCQ monthly report — May 2026
- Plate & Sheet Rolling — Online Quotes (AllMetalQuotes)
- Metal fabrication cost per hour (Canada) — Interchange Electronics
